• Medical Device companies have the opportunity to leverage digitalization and the digital enterprise to develop innovative products and bring them to market quickly. Watch this edition of Tech-Clarity TV to learn about the digitalization opportunity and stay tuned for the rest of the series detailing specific business improvement opportunities including: Digital design Digital design transfer Paperless manufacturing The video shares how medical device manufacturers are embracing digitalization and gaining significant benefits including faster time to market, increased quality, and improved … [ read more ]

    The Digitalization Opportunity for Medical Device Companies (video)
  • On Thursday, May 18 at 2:00 EDT, Michelle Boucher will share best practices to improve the efficiency of simulation postprocessing. During this webinar,  Shawn Wasserman, simulation editor at ENGINEERING.com, will join Michelle. This webinar will reveal: Common challenges during the postprocessing phase Best practices to overcome those postprocessing challenges Case studies demonstrating the benefits of efficient postprocessing   Register for this event today.   … [ read more ]

    Webinar: Solving the Bottlenecks of Simulation: Postprocessing – May 18, 2PM ET
  • The How-to Guide to Adopting a New 3D CAD  shares best practices for changing from one 3D CAD tool to another. The guide shares the reasons you should consider making a change, potential benefits of making a change, and advice for selecting a new tool. The guide then goes deeper into the steps you should take to plan a migration, training resources, what to do with legacy data, and how to prioritize what legacy data you convert. These best practices were developed by analyzing the responses of those who were very satisfied with their transition process. Their responses were compared to the rest to identify … [ read more ]

    Adopting a New 3D CAD (survey findings eBook)
  • Are you making your products smarter? Are you feeling pressure to add software and electronics? Please share your experience, thoughts, and lessons learned  in this new survey on transforming product design to develop smart products. The survey explores challenges you should be aware of, the impacts of those challenges, and how to avoid them. We will explore questions such as: What strategies should you consider when developing connected products? What challenges should you be aware of when designing the PCB? How do you overcome electrical wiring challenges? We would like to learn what you find hard … [ read more ]

    Transforming Product Design for Today’s Smart Products (survey invite)
  • Jim Brown joins Autodesk's Michael Vesperman during this Engineering Live panel discussion moderated by Janine Mooney, Editor in Chief at Advantage Business Media. Jim and Michael share insights from recent survey results and customer experience in an interactive discussion on NPDI.  They share NPD best practices and technology including 7 things that Top Performers in NPDI do differently than the rest. Watch the on demand replay now! … [ read more ]

    Beating the Competition with New Product Development and Introduction (webcast)

A&D SimulationHow A&D Companies Get More Value from Simulation – Guest Post on Siemens Blog

How Aerospace and Defense (A&D) Companies Get More Value from Simulation is a new Siemens guest post. In this post, Michelle Boucher explores how A&D companies use simulation. The post highlights challenges faced by A&D companies and then shares survey results revealing some of the top ways A&D solve them. Read the post on the

Frequency for OptimizationWhat Is an Optimized Product Design? – Guest Post on Siemens Blog

In a new Siemens guest post, What Is an Optimized Product Design? Michelle Boucher discusses how companies use simulation to optimize their products. However, the term optimization came be a bit vague as it means different things to different people. To clarify the term, this post shares additional data from our recent study, Addressing the Bottlenecks of FEA

How Should You Use Simulation? – Guest Post on Siemens Blog

Michelle Boucher shares additional findings from our recent study, Addressing the Bottlenecks of FEA Simulation in this Siemens guest post, How Should You Use Simulation. This guest post discusses some of the  the top ways Top Performing companies apply simulation during product development. The post shares additional survey data on the benefits Top Performers report as a result of using simulation.

How Simulation Solves Some of Today’s Top Product Development Challenges – Guest Post on Siemens Blog

In this Siemens guest post, How Simulation Solves Some of Today’s Top Product Development Challenges Michelle Boucher shares additional findings from our recent study, Addressing the Bottlenecks of FEA Simulation. This guest post shares some of the top development challenges companies struggle with and then shares some of the ways Top Performing companies address these challenges. Simulation is

Simulation BottlenecksAnnouncing New Research on FEA Simulation Bottlenecks – Guest Post on Siemens Blog

Michelle Boucher shares new research on simulation in this Siemens guest post, Announcing New Research on FEA Simulation Bottlenecks. Simulation can be a powerful tool to help guide design decisions. Consequently, the more it used, the more value companies tend to get from it. Unfortunately, companies do not get as much value as they could because bottlenecks

Addressing the Bottlenecks of FEA Simulation (Survey Findings)

Tech-Clarity’s Addressing the Bottlenecks of FEA Simulation: Enabling Innovation by Getting Even More Value from CAE shares survey results on the simulation process. The analysis identified the top simulation bottlenecks that slow down the process. With a better understanding of these bottlenecks, manufacturers can take steps to minimize them and consequently, get even more value from simulation.